Application

1. Ensure deck is clean & dry
2. Lightly sand deck & remove dust
3. Tape & measure each Supadex traction panel
4. Secure each panel, then draw your rail line and cut out excess as desired
5. Flip & trace to mirror your design, or be creative!
6. Apply the panels starting from the tail end of the board
7. Peel backing away and smooth onto deck
8. Wait 24 hours before use - surf's up!

Removal

1. Carefully peel Supadex traction panels from one end to the other
2. Wipe / Sand down your board to ensure all adhesivemarks / residue are gone
3. To apply a new Supadex traction panel, repeat the application steps!

Note: repeated removal and reapplication of the same Supadex panel may decrease its adhesive capabilities.